Palmgren 61051 AP05 1/2-Ton Manual Arbor Press

Palmgren 61051 AP05 1/2-Ton Manual Arbor Press Review

Palmgren 61051 AP05 1/2-Ton Manual Arbor Press Feature

• Study cast iron construction
• Removable machined steel anvil provides accurate work support in four slot positions
• Rugged steel ram is driven by machined pinion.
• Punches or tools may be added to the end of the ram with the aid of a magnetic insert
• Base drilled for mounting on bench or pedestal.

Arbor Presses Machine Type: Mechanical Pressure: 1/2

Shop Fox W1668 3/4 HP 13-Inch Bench-Top Drill Press

Shop Fox W1668 3/4 HP 13-Inch Bench-Top Drill Press Review

Shop Fox W1668 3/4 HP 13-Inch Bench-Top Drill Press Feature

• Motor: 3/4 HP, 110-Volt, 1,725 RPM
• Overall height: 38-Inch
• Spindle travel: 3-1/4-Inch
• Swing: 13-1/4-Inch
• Drill chuck: 5/8-Inch

The Shop Fox H0626 Oscillating Drill Press functions as a 12-speed oscillating sander that can be used for contour sanding. With 12 speeds, extra power and a high-capacity motor, this machine is ready to take on the heavy jobs. The table is supplied with a clearance hole for use while sanding, and a clever design incorporates a dust collection port so that sanding is less messy. The drill chuck ranges from 1/8 to 5/8 inches, and the 3/4 HP motor performs up to 1725 RPM and runs on 110-volt power supply. The drill has a spindle travel of 3-1/4 inches and an overall swing of 13-1/4 inches. Just like it's little brother (H0625), this 12 speed oscillating sander can be used for efficient contour sanding. With more speeds, more power & more capacity this machine becomes an effective tool for heavier use. The table is supplied with a clearance hole for use while sanding. This clever design incorporates a dust collection port so that sanding is less messy. With a 3/4" drilling capacity in steel you'll be able to tackle most any drilling job as well. Check out these specs below. Specifications: ? Motor: 3/4 H.P. 110V, 1725 RPM ? Overall height: 38" ? Spindle travel: 3-1/4" ? Swing: 13-1/4" ? Drill chuck: 1/64"-5/8" (1-16mm) ? Number of speeds: 12 ? Range of speeds: 12(250-3050 RPM) ? Table: Round 12-3/8" Dia. ? Table swing: 360° ? Approx. shipping weight: 127 lbs. Includes 1", 1-1/2" & 2" Sanding Drum Set

5 Speed Drill Press

5 Speed Drill Press Review

DP5UL Features: -Cast iron table, base and drill body. -Table tilts 0-90 degrees left to right. -Front mounted safety on/off switch. -Max speed: 620-3, 100 RPM. -1/2'' Chuck. -0.25 HP motor. -Construction Material: Metal / Iron. -Dimensions: 14'' H x 9'' W x 18'' D.

Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic

Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic Review

Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic Feature

• Includes 20 assorted shapes covered with diamond particles.
• All bits have 1/8" shanks and come in convienient plastic holder.
• Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing.
• 180 grit
• Made In China

Professional Quality, 1/8 in. Shank, 180 Grit. Includes 20 assorted shapes covered with diamond particles. All bits have 1/8 in. shanks and come in convienient plastic holder. Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials.

Dremel 220-01 Rotary Tool Work Station

Dremel 220-01 Rotary Tool Work Station Review

Dremel 220-01 Rotary Tool Work Station Feature

• Rotary tool work station holds more than a dozen Dremel tool models
• Converts to drill press; drills at 90-degree vertical angle and in 15-degree increments to 90 degrees horizontal
• Features a sturdy metal 56-square-inch base
• Includes work station, mounting wrench, and instructions; rotary tool not included
• Backed by a one-year limited warranty

Ideal for crafts, hobbies, metal working, and a variety of around-the-house jobs, the 220-01 Dremel Work Station transforms any Dremel rotary tool into a tabletop drill press. It can be bolted on to your workbench, and it has the versatility to operate as a tool holder, flex shaft holder, and drill press. This rotary tool work station holds Dremel rotary tool models 4000, 3000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 780, 770, and 7700 (tool not included).

The Dremel Work Station can be tilted in 15-degree increments. View larger.

All-In-One Operation
The Dremel Work Station gives you the flexibility to tackle hobbies, fix-it renovations, or special projects without having to invest in a variety of separate tools and attachments. Its stable, sturdy design lets you perform low-torque, high-speed jobs like drilling holes in metal to make earrings and bracelets, or sanding even the most detailed pieces of an architectural model. Measuring 56 square inches, and offering a drill depth of two inches, the sturdy, slotted base has four clamping points, while a rack and pinion feed lever ensures smooth, accurate operation.

Flexibility for Intricate Work
Whether you're buffing stones or sanding parts of a radio-controlled airplane, you'll appreciate that you can tilt the Dremel Work Station in 15-degree increments from 15 to 90 degrees horizontal -- perfect for more focused, intricate work. When you're grinding or polishing materials, the tool holder prevents slippage by keeping tools at 90 degrees, and the telescoping FlexShaft tool stand lets you adjust to any height between 16 and 29 inches. Once you've finished working for the day, place bits, collets, and wrenches in the tool caddy for easy clean-up and storage.

Easy Setup and Durable, User-Friendly Design
Easy to set up and operate, the Work Station features straightforward, durable construction. Clips keep messy cords from obscuring your visibility as you work, and inch and metric markings on the base allow for precise measurements and ensure that your adjustments are consistent, too. Compatible rotary tools attach and detach smoothly so you can polish, grind, or drill holes in stone, metal, or glass for rivets, eyelets, or cold connections of any sort.

What's in the Box
Work Station, accessory nest, mounting wrench, and instructions

This work station holds Dremel rotary tool models 100, 200, 275, 285, 300, 395, 595 and 850 (tool not included)

Turn that Dremel rotary tool into a drill press with this rotary tool workstation from Dremel. The station accepts several Dremel models to drill perpendicular and angled holes in 15-degree increments from 90 degrees vertical to 90 degrees horizontal. Inch and metric markings on the base make for accurate drilling of workpieces. Depth markings with depth stop provide consistent depth adjustment, while the sturdy metal base with four clamping points holds workpieces securely in place. The workstation also holds the rotary tool steady for other tasks, such as polishing metal objects, sanding different shapes and grinding metal pieces--with greater precision and less fatigue. The station's telescoping shaft allows adjustments to any height between 16 and 29 inches. On-board storage for drill bits, cords, and wrenches keep them all in handy reach. What's in the Box Work station, accessory nest, mounting wrench, instructions

Rockler JIG IT Drill Guide

Rockler JIG IT Drill Guide Review

Rockler JIG IT Drill Guide Feature

• Allows you to drill holes perfectly perpendicular to the surface using a hand drill
• Use with our 3/8" diameter shank Forstner Bits (sold separately)
• Use with a 3/8 stop collar (sold separately)
• Rockler Exclusive

No need for a drill press! Our exclusive JIG IT Drill Guide allows you to drill holes perfectly perpendicular to the surface with just a hand drill. Use with our 3/8" diameter shank Forstner Bits. Use with a 3/8 stop collar (sold separately).

Big Horn 19630 Drill Press Vise Clamp

Big Horn 19630 Drill Press Vise Clamp Review

Big Horn 19630 Drill Press Vise Clamp Feature

• Holds work firmly to drilling table
• Fast locking of pieces in jig setups

The Big Horn 19630 is a 9 Inch Vise Clamp. The strong, fast acting 9 inch clamp, with 3-1/2 Inch throat attaches easily to drill press or other shop fixtures. Features: Holds work firmly to drilling table Fast locking of pieces in jig setups Increases efficiency, accuracy, and safety. Use for easy locking in jig setups when drilling or welding. Holds work firmly to drilling table. What's In the Box: Big Horn 19630 9 Inch Vise Clamp

Milwaukee 4202 Fixed Position Electromagnetic Drill Press, Base Only

Milwaukee 4202 Fixed Position Electromagnetic Drill Press, Base Only Review

Milwaukee 4202 Fixed Position Electromagnetic Drill Press, Base Only Feature

• 120 Volt AC only, 12.5 amp max. rating
• 9 inch drill travel
• Fixed position, variable speed base
• For use on any flat ferrous material, 1/2 inch and thicker
• Limited warranty, 30-day no-risk trial

4202 Type: Base Fixed (part# 4202) This item features: -Automatic electronic soft start. -Line lock-out prevents operation should voltage be restored to an interrupted line when switch is locked ''on.''. -Motor/magnet interlock. -9'' drill travel. -Feedback speed control. -Solid state electronic switching. -Forward/reverse control. -Computer controlled reverse. -Full wave magnetic holding power. -Base control panel includes variable speed adjustment for motor. -Automatic base/chip de-mag. -For any flat ferrous material 1/2'' and thicker. -Motor not included. -11'' drill travel. -Type: Electromagnetic Base Stand. -Price is for 1 Each. Testing and approvals: -Complies with OSHA and UL requirements.

JET J-2550 20-Inch 1-Horsepower 115-Volt Single Phase Floor Model Drill Press

JET J-2550 20-Inch 1-Horsepower 115-Volt Single Phase Floor Model Drill Press Review

JET J-2550 20-Inch 1-Horsepower 115-Volt Single Phase Floor Model Drill Press Feature

• Cast iron head
• Large quill allows greater accuracy
• Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life.
• Massive T-slotted production work table (Model J-2550 only)
• Table tilts 45°

Includes J-2550, 20-in Floor Model Drill Press 1HP - 354402

4-Way Chuck Key for Drills Drill Presses 3/8" & 1/2" #1 #2 #3 #4

4-Way Chuck Key for Drills Drill Presses 3/8" & 1/2" #1 #2 #3 #4 Review

4-Way Chuck Key for Drills Drill Presses 3/8" & 1/2" #1 #2 #3 #4 Feature

• Essential power tool accessory for hand-held power & cordless drills, drill presses
• One tool with 4 key sizes for tightening and loosening chuck
• Key sizes #1, #2, #3 and #4 overs all 3/8" and most 1/2" chucks
• Hardened steel with baked enamel finish
• Drill without properly tightened chuck is virtually worthless - always keep extra key on hand

Powermatic PM2800-90th 90th Anniversary Black Onyx Limited Edition 18-Inch Variable Speed Drill Press

Powermatic PM2800-90th 90th Anniversary Black Onyx Limited Edition 18-Inch Variable Speed Drill Press Review

Powermatic PM2800-90th 90th Anniversary Black Onyx Limited Edition 18-Inch Variable Speed Drill Press Feature

• Powered by a heavy duty 1HP, 1Ph, 115/230V TEFC motor for maximum torque
• Head mounted dual laser guide system provides a consistent drilling cross point on workpiece
• A new, larger table system with dual extensions for the largest woodworking table on the market; features twin T-slot grooves for a miter gauge or other homemade jigs
• Built-in dual LED work light eliminates cast shadows
• Newly designed table tilts 90° and has a positive stop at 0°

Designed with the needs of the professional woodworker in mind, the Powermatic Onyx PM2800 18-inch variable-speed 90th anniversary limited edition drill press offers innovative features other models simply cannot match. Built for ultra-dependable performance, the Onyx PM2800 features dual LED work lights and a dual laser guide system. Both the expandable work table and motor are the industry's largest in the PM2800's class.

Onyx PM2800 90th Anniversary Limited Edition Drill Press At a Glance: Features Carter quick-tension lever for speedy blade changes Easy to read tensioning gauge settings indicated in blade width increments Precision balanced, nine-spoke cast-iron wheels reduce vibration 60-watt adjustable lamp built into the body (bulb not included) Rigid, one-piece welded stand that requires no assembly

Powermatic's Onyx PM2800 90th anniversary drill press has a host of innovative features (view larger.)

Durable and Versatile
With high-end castings and ultra-tough steel components, the Onyx PM2800 is as durable as it is versatile. The three-and-one-eighth-inch diameter steel column, oversized quill, and cast-iron table system provide the rigidity needed for true accuracy and repeatability. The all cast-iron base offers stability, decreases vibrations, and comes with holes in each corner for securing the Onyx PM2800 to a suitable floor. For incredible versatility, the Onyx PM2800 offers a full 18-inch swing, a spindle-to-base clearance of 47 inches, and a maximum spindle-to-table capacity of 26-1/2 inches.

Powerful One-Horsepower TEFC Motor
The Onyx PM2800 comes equipped with a heavy-duty one-horsepower, one-Ph, 15-/eight-amp, TEFC (totally enclosed fan cooled) motor that's pre-wired for 115-volt power, but can be converted to use 230 volts. To make it easy to apply all that power, a single-handle, variable-speed control lets the user choose the speed needed without touching the belt. And the 400 to 3,000 RPM spindle speed range provides additional flexibility.

Lights and Laser for Accuracy
To help ensure optimum accuracy, the Onyx PM2800 boasts a pair of strategically located LED work lights that are bright enough to make seeing layout marks easy, but mounted on the underside of the head to prevent glaring. A simple push-button on/off switch lets you use the LED lights only when needed. A second push-button on/off switch controls a pair of fully adjustable lasers aimed to create an "X" at the drill-bit point of entry.

Keyless Chuck and Spindle
For user-friendly operation, the Onyx PM2800 has an oversized two-inch diameter quill with a number-two Morse taper for stability even when using large bits in tough woods. There's also a high quality, keyless, 5/8-inch capacity chuck for effortless bit changes, and a quill (spindle) assembly with full 4-3/8-inch plunge capacity. Finger-operated depth stops make it easy to limit drilling depth for repetitive jobs, while three large handles make plunging the spindle easy, even when drilling large holes in tough woods.

Expandable Table for Flexibility
Measuring 14 inches by 16 inches, the main surface table gives you plenty of space for larger work pieces. If you need more room, simply slide the extensions out and the width grows to 30 inches. For added convenience, the table features twin T-slot grooves for a miter gauge or other homemade jigs. It also tilts to 90 degrees to the left or right and can be locked at any point. The Onyx PM2800 boasts a fence with a pair of flat, extruded aluminum faces that can be opened to increase the overall support to 30 inches. Splitting the fence faces also reveals the inlet for the built-in dust collection that terminates in a two-inch diameter ID port that angles out from the rear of the fence to keep the hose out of the way.

What's in the Box
One column assembly with rack and ring, one head assembly, one base, one table bracket and table, three down-feed handles, one chuck, one drift key, one arbor, one shift knob, one locking handle, all necessary hardware, manual, and warranty card.

Powermatic's Onyx PM2800 90th anniversary drill press has a heavy-duty motor, large table, and sturdy construction (click each to enlarge).

Includes PM2800 18-in Black Onyx Variable Speed Drill Press - 1792800PK, 27-in x 42-in Workshop Fatigue Mat

Drill Press Fence, Woodpeckers DP3FENCE

Drill Press Fence, Woodpeckers DP3FENCE Review

Drill Press Table Fence - Woodpeckers DP3FENCE This is a rather heavy drill press table fence, 3/8 thick x 3 x 3 x 23-1/2 long. Both the bottom and front of this drill press table fence are machined to give an accurate 90 degrees from the table. The two i

Bench Drill Press Stand Drilling Machinist Tool New

Bench Drill Press Stand Drilling Machinist Tool New Review

Bench Drill Press Stand Drilling Machinist Tool New. This a new adjustable drill stand. Perfect for shop or home use. Not for use with a Dremel tool. Has 2 holes for mounting. It measures approximately 6 1/4" x 9" x 17 1/4" (158.75 x 228.6 x 438.15 mm). We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.