Steelex D2192 10-Inch Drill Press Clamp

Steelex D2192 10-Inch Drill Press Clamp Review

Steelex D2192 10-Inch Drill Press Clamp Feature

• 10-Inch
• 3-Inch capacity

This "one press" drill press clamp adjusts quickly and easily to lock your work piece in any position. The clamping pad pivots to conform to any work piece, ensuring uniform pressure. Fastens to drill press slot holding vise-pliers tight where other clamps can't reach.

Jet JDP-12 12-Inch Drill Press with Digital Readout

Jet JDP-12 12-Inch Drill Press with Digital Readout Review

Jet JDP-12 12-Inch Drill Press with Digital Readout Feature

• Compact bench top design allows for easy transport to different shop locations
• Industrial duty 5/8-inch chuck handles large drill bits
• Digital readout displays spindle speed for optimal drilling
• LED work light increases visibility of work piece
• Clear linear scale with depth stop for accurate, consistent drilling depth

Enjoy the accuracy of a drill press without taking up all of the space with this drill press from JET. It has the power to cut any hole you need with a 1/3-horsepower motor, 110 volts, a 530-3,100 rpm, a 3.15 vertical stroke, 360-degree head swivel, a 5/8-inch drilling capacity, and includes a light.

Precision Drill Guide

Precision Drill Guide Review

Precision Drill Guide Feature

• Precision Drill Guide Is A Portable Drill Press!
• Don't be limited by extra wide stock that won't fit your drill press
• Chuck your electric drill to the 3/8" spindle to operate
• A depth stop is provided for accurate boring and countersinking
• Includes a three jaw 0-3/8" geared chuck

With this drill guide, you can drill any fixed angle from 45 degrees to 90 degrees drill round stock on center by using the integral Vee guides. Center edge drilling by using the anchor pins in the base for fences.

7/16" Collet ROTARY DRILL STAND Table Bench Top - NEW

7/16" Collet ROTARY DRILL STAND Table Bench Top - NEW Review

7/16" Collet ROTARY DRILL STAND Table Bench Top - NEW Feature

• Drill / Rotary Stand
• Collet Size: 1-7/16" (43 mm)
• Drilling Depth: 2.36" (0-60 mm)
• Over All Dimension: 6-1/4" x 13-1/2" x 19-1/2"

JET 354210/JDP-20EVS(230V) 20-Inch Electronic Variable Speed Drill Press

JET 354210/JDP-20EVS(230V) 20-Inch Electronic Variable Speed Drill Press Review

JET 354210/JDP-20EVS(230V) 20-Inch Electronic Variable Speed Drill Press Feature

• 2HP, 3Ph, 230V motor
• Tapping and reversing controls
• Complete coolant system
• Variable spindle speeds with a range of 65-2000 RPM

Includes 20-in 2 HP 3-Phase 230V Variable Speed Drill Press - 354210, Integrated Tapping &, Reversing Controls, Complete Coolant System, T-Slotted Work Table

Proxxon 38128 TBM Bench Drill Machine

Proxxon 38128 TBM Bench Drill Machine Review

Proxxon 38128 TBM Bench Drill Machine Feature

• 110-120V, 65HZ, 85W comes with 6 steel collets size 1/32, 1/16, 5/64, 3/32, 7/64 and 1/8 inches (1.0, 1.5, 2.0, 2.4, 3.0, 3.2 millimeter)
• Recommend clamp work pieces with Proxxon Machine Vise number 28132 or 24260
• Convert this machine into a high precision machining center with use of 24256 Proxxon KT 70 Micro Compound Table
• Optional Proxxon Original German Rohm Chuck umber 28122 available

The unit offers a high quality machined work table of ribbed die-cast aluminum (worktable size 8 21/32" x 4 23/32" (220 x 120 mm) providing an adjustable fence with scale. The solid, hard-chromed steel column is 11" high (280 mm) and has a diameter of 3/4" (20 mm). The 110-120V/85W motor, which runs very quiet and has a long life expectancy is built in to the super stable die-cast head of the machine. The power transmission by 3-step aluminum pulleys and flat belt provides 3 spindle speeds of 1,800, 4,700 and 8,500 rpm allowing triple torque at low speeds. The chrome feed lever has an adjustable depth scale. The spindle is essentially free of play as a result of the 3 high quality ball bearing assemblies. For the insertion of MICROMOT steel collets it is recessed, but also threaded for attaching drill chucks with 3/8" thread (for this option see below the Roehm drill chuck, which we offer as an accessory). The spindle has an extremely high rotational accuracy and a 1 3/16" (30 mm) feed. The quill diameter is 1 1/4" (32 mm) with return spring, the throat depth (column to drill spindle) 5 1/2" (140 mm). The unit provides quick coarse height adjustment of headstock via clamp lever. The max. height (worktable surface to spindle end) is 5 1/2" (140 mm). The unit comes with six triple slit MICROMOT precision steel collets for shaft sizes ranging from 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.4, 3.0, 3.2 mm).

General Tool 36/37 Accu Precision Drill Guide

General Tool 36/37 Accu Precision Drill Guide Review

General Tool 36/37 Accu Precision Drill Guide Feature

• Cross slide lock for accurated shaping and carving
• Positive stop for accurate drill depth control
• Dual locking knob and handle holds precise angle setting
• Folds flat for tool box storage
• V-guides automatically center round stock for drilling

Turns your hand-held drill into a mini drill press! Just attach the Drill Guide to any standard 3/8" or 1/2" drill and bore round stock, stopped holes, angled holes and edges. This tool features automatic spring action and anchoring pins for secure drilling.

JET JDP-17MF/354169 Drill Press

JET JDP-17MF/354169 Drill Press Review

JET JDP-17MF/354169 Drill Press Feature

• 16-1/2-Inch drill press; 13-3/4-Inch table tilts 45-Degree left and right
• 16 speeds from 200 to 3,630 rpm; 3/4-horsepower motor
• Cast-iron construction with heavy-steel components
• Includes drill press, drill chuck and key; bulb for work light not-included
• 178-Pound; 1-year limited warranty

A staple in the professional woodshop, a drill press should be able to perform grunt work, yet quickly adjust for precision applications. Jet's 16-1/2-inch model does just that. Made of cast-iron and heavy-gauge steel components, this press spins bits up to 5/8 of an inch with 16 speeds from 200 to 3,630 rpm. A 3/4-horsepower induction motor drives the belts, and, for your convenience, it can run off either 115-volt outlets (for which it comes prewired) or 230-volt sources. The large 13-3/4-inch worktable glides easily with rack-and-pinion adjustment and tilts 45 degrees right or left to accommodate your needs. Two features we like are the positive depth stop on the left side, which quickly adjusts and locks in place via three nuts, and the built-in lamp, a nice touch some competitors don't offer. Changing belt position is a snap after flipping open the hinged metal cover, and, to personalize the press for your comfort and peace of mind, you can adjust the tension on the spindle return spring, as well as lock out the start button to protect others in your absence. This industrial-style drill press is a tool any professional or serious home woodworker can depend on. --Justin Paul Hinged metal belt and pulley cover provides easy access to the quick adjustment motor mount to allow rapid spindle changes; Rotating, 45 deg. tilting crank-operated worktable has quick release clamp for fast, accurate adjustments; 1/2" diameter external positive depth stop has a dual-nut locking feature for quick adjustments

Northern Industrial Bench Drill Press with Laser - 16-Speed, 3/4 HP

Northern Industrial Bench Drill Press with Laser - 16-Speed, 3/4 HP Review

Northern Industrial Bench Drill Press with Laser - 16-Speed, 3/4 HP Feature

• Rack and Pinion table height adjust
• Depth lock
• Spindle taper: MT-2
• Screwdriver handle
• 17 15/16in. x 10 5/8in. base

Precision drilling and pinpoint accuracy in one powerful machine. HP: 3/4, Volts: 120, Speed (RPM): 250-3,100, Speeds (qty.): 16, Vertical Stroke: 3 11/64in., Swing: 13in., Drilling Capacity (in.): 5/8, Chuck Size (in.): 5/8, Worktable L x W (in.): 10 x 10, Dimensions L x W x H (in.): 13 x 22 x 41 3/4

Factory-Reconditioned Skil 3320-01-RT 3.2 Amp 10-Inch Drill Press

Factory-Reconditioned Skil 3320-01-RT 3.2 Amp 10-Inch Drill Press Review

Factory-Reconditioned Skil 3320-01-RT 3.2 Amp 10-Inch Drill Press Feature

• Reconditioned Skil Products have a One-year warranty through the Skil factory or an authorized service center
• Laser X2 2-Beam Laser for precise hole alignment
• Depth Adjustment System for easy depth control
• Variable Speed Gearing-5 speed system for different material types
• 0-45 degree tilting work surface for precise and accurate drilling

This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new conditions. Some tools may contain cosmetic blemishes. The 3320-01 Drill Press with Laser is the newest addition to the Skil family. It offers a powerful 3.2 Amp motor and comes with a cast iron base and work table.